Tabla de contenido
Publicidad
6.
Pole bracket will need to be lightly pressed into backboard ribbing. Be sure to press
completely into place. Attach rim to backboard and pole bracket (14) with nut (5),
reinforcement bracket (15), and carriage bolt (8) as shown. Tighten nut completely.
Press
bracket (14)
into place
here.
8
Carefully tip unit forward and slide backboard
assembly onto pole as shown.
14
SAWHORSE OR SUPPORT TABLE
13
XSHBM01a1.EPS
211208
12
5
12
15
Publicidad
Tabla de contenido
