14
Other settings
SETTING/[MEDIA] button
STYLE/[MUSIC STYLE]
button
Keyboard
part
Changing the auto power-off function
This instrument has an auto power-off function that
automatically turns off the power when the unit has not been
played or operated for a certain length of time. The time interval
is set to 30 minutes at factory default, but this can be changed.
1.
Press the SETTING/[MEDIA] button to enter the settings
function.
2.
Press the CATEGORY button t/u several times to select
"P22: Auto PowerOff."
3.
Turn the dial to select "Disable" or a specific time after
which the power will turn off.
4.
Press the [SHIFT] button to return to the previous mode.
Changing the pedal polarity
If the sound does not sustain when you press the pedal
connected to the rear panel of this instrument, but the sound
does sustain when you take your foot off, you will need to
change the XE20's pedal polarity setting.
1.
Press the SETTING/[MEDIA] button to enter the settings
function.
2.
Press the CATEGORY button t/u several times to select
"P03: Pedal Polarity."
3.
Turn the dial to change the polarity.
− (KORG): This is the factory default setting. Use this setting
when using a DS-1H, PS-1 or PS-3 pedal.
+ (Reverse): This setting reverses the effect made when
operating the pedal.
4.
Press the [SHIFT] button to return to the previous mode.
Other settings
[SHIFT] button
Dial