Siemens SITRANS F MAG 8000 Manual Del Usuario página 5

Remote version
1. Verify that model and serial numbers shown on labels of sensor and transmitter are matched properly.
2. Ensure that cable is safely installed to avoid damage to cable and connectors. Please note the different connector types
for coil and electrodes, both having a minimum radius of 45 mm (1.8 inches); otherwise there is a risk of damaging the
cable. Save dust covers for future use and protection.
3. Ensure connectors are clean.
4. Ensure connectors are fastened securely to achieve a good connection and watertight sealing.
Note
If dirt enters connector ends, use plain water for cleaning. Ensure connectors are completely dry before making
connections.
NOTICE
Direct burial of remote sensor
The use of at least 300 mm pea gravel around the sensor and metal plate on top is mandatory for direct burial of remote
sensor.
MAG 8000 Irrigation water meter
A5E02972853-002, 03/2014
5