Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
AUTOMOTIVE PRODUCTS, INC.
MOUNT KIT
EQUIPO DE MONTAJE
JEU DE MONTAGE
27-1535
SURE-GRIP
BOARDS
27-6110 27-6115
27-6150 27-6155
27-6510 27-6550
ITEM
QTY
CONTENTS -
1,2
2
STEP BOARD, PASSENGER (1) AND DRIVER (2) (SOLD SEPARATELY)
3
6
MOUNT BRACKET
4
6
5/16-18 X 1.00" HEX HEAD BOLT (NOT USED IN REGULAR CAB)
5
12
5/16-18 X .75" SQUARE HEAD BOLT
6
2
5/16 X .75" SELF TAPPING SCREW
7
18
5/16" FLAT WASHER (REGULAR CAB ONLY USES 12)
8
6
5/16" LOCK WASHER
9
12
5/16-18 NYLOCK NUT
10
6
EXTRUDED U-NUT
11
6
3/8-16 X 1.00" HEX HEAD BOLT
12
12
3/8" FLAT WASHER
13
6
3/8" LOCK WASHER
14
6
3/8-16 HEX NUT
1,2
2
ESTRIBOS, ACOMPAÑANTE (1) CONDUCTOR (2) (SE COMPRA SEPARADO)
3
6
SOPORTE
4
6
PERNOS CON CABEZA HEXAGONAL DE 5/16-18 X 1,00" (LA NOTA UTILIZO EN LA CABINA REGULAR)
5
12
PERNOS CON CABEZA CUADRADA DE 5/16"
6
2
PERNOS AUTOROSCANTES DE 5/16-18 X ,75" (LA NOTA UTILIZO EN LA CABINA
SUPERCREW)
7
18
ARANDELAS PLANAS DE 5/16" (LA CABINA REGULAR SOLO UTILIZA 12)
8
6
ARANDELAS DE PRESIÓN DE 5/16" (LA NOTA UTILIZO EN LA CABINA REGULAR)
9
12
TUERCA PRESIÓN DE 5/16"
10
6
TUERCA A PRESIÓN EN "U" (LA CABINA REGULAR SOLO UTILIZA 2)
11
6
PERNOS CON CABEZA HEXAGONAL DE 3/8-16 X 1,00"
12
12
ARANDELAS PLANAS DE 3/8"
13
6
ARANDELAS DE PRESIÓN DE 3/8"
14
6
TUERCAS HEXAGONALES DE 3/8-16
1,2
2
MARCHE-PIEDS, PASSAGER (1) ET CONDUCTEUR (2) (ACHETE SEPAREMENT)
3
6
SUPPORTS
4
6
BOULONS A TETE HEXAGONALE 5/16-18 X 1,00 PO (LA NOTE A UTILISE DANS LE
CABINA REGULIERE)
5
12
BOULON A TETE CARREE 5/16 PO
6
2
VIS AUTO-TARAUDEUSE 5/16-18 X ,75 PO(LA NOTE A UTILISE DANS LE CABINA SUPERCREW)
7
18
RONDELLES PLATES 5/16 PO (LE CABINA REGULIERE UTILISE SEULEMENT 12)
8
6
RONDELLES A FREIN 5/16 PO (LA NOTE A UTILISE DANS LE CABINA REGULIERE)
9
12
ECROU A FREIN 5/16 PO
10
6
ECROU EN U EXTRUDE (LE CABINA REGULIERE UTILISE SEULEMENT 2)
11
6
BOULONS A TETE HEXAGONALE 3/8-16 X 1,00 PO
12
12
RONDELLES PLATES 3/8 PO
13
6
RONDELLES A FREIN 3/8 PO
14
6
ÉCROUS HEXAGONAUX 3/8 PO
STEP 1.
Remove contents from box and check for damage. Verify all parts are present. Read instructions completely before beginning. It is strongly
recommended to install the Sure Grip Gap Strip for these vehicle applications.
STEP 2.
Locate mounting locations as shown.
NOTE:
REG CAB ONLY! Using bracket, mark holes and drill as shown.
each hole. Remove end cap from running board. Carefully cut off 10" from end. Reinstall end cap.
STEP 3.
Install u-nuts as shown.
Attach mounting brackets as shown. Hand tighten.
STEP 4.
STEP 5.
Insert square head bolts as shown. (3 per slot, 6 per board).
NOTE:
For lighted boards, run wiring harness prior to attaching board to brackets (refer to Step 8)
wire harness on passenger side.
STEP 6.
For Sure-Grip Running Boards, slide closure strip as shown. Set lights (if purchased) in appropriate location. Attach to Sure-Grip Running Board
as shown.
SEE FIGURE 7.
Attach board to brackets as shown. Make sure board and brackets are properly aligned and tighten fasteners. Recommended torque values are 10
STEP 7.
FT.LBS. for 5/16" square head fasteners, 15 FT. LBS for 5/16" fasteners and 26 FT.LBS. for 3/8" fasteners.
INSTRUCTIONS-INSTRUCCIONES-CONSIGNES
APPLICATION:
APLICACIÓN:
APPLICATION:
SURE-GRIP
OPTIONAL LIGHT
KIT
27-6000
1
CONTENIDO
- CONTENU
(NOT USED IN SUPERCREW)
(NOT USED IN REGULAR CAB)
(REGULAR CAB ONLY USES 2)
SEE FIGURE 1.
SEE FIGURES 2 AND 3.
Drill hole through plastic strip and run wires as shown.
2004-09 FORD F-150 REGULAR CAB
2004-08 FORD F-150 SUPER CREW
2006-08 LINCOLN MARK LT SUPER CREW
FORD F-150 CABINA REGULAR 2004-09
FORD F-150 CABINA
SUPER CREW
LINCOLN MARK LT SUPER CREW 2006-08
2004-09 FORD F-150 CABINE REGULIERE
2004-08 FORD F-150 CABINE SUPER CREW
2006-08 LINCOLN MARK LT SUPER CREW
SEE FIGURE 4.
SEE FIGURES 3 AND 5.
SEE FIGURES 8 AND 9.
WO:
2004-08
TOOLS-HERRAMIENTA-OUTILS
1/2" SOCKET
1/2" WRENCH
9/16" SOCKET
DRILL
7/16" DRILL BIT
3/16" DRILL BIT
HACKSAW
RATCHET
TORQUE WRENCH
DADO DE 1/2"
LLAVE DE TUERCAS DE 1/2"
DADO DE 9/16"
TALADRO
BROCA DE 7/16"
BROCA DE 3/16"
SIERRA PARA METALES
MANERAL
LLAVE DE TORQUE
DOUILLE 1/2 PO
CLE 1/2 PO
DOUILLE 9/16 PO
PERCEUSE
MECHE 7/16 PO
MECHE 3/16 PO
SCIE A METAUX
CLIQUET
CLE DE COUPLE
NOTE:
Be sure to use the correct drill bit size for
SEE FIGURE 6.
.
SEE FIGURES 8,9, AND 10
SEE FIGURE 10.
SEE FIGURE 11.
75-0709 REVISION E 10/14/08
3
.
Run longer
Publicidad
Manuales relacionados para Westin 27-1535
Resumen de contenidos para Westin 27-1535
- Página 1 2004-09 FORD F-150 CABINE REGULIERE AUTOMOTIVE PRODUCTS, INC. 2004-08 FORD F-150 CABINE SUPER CREW 2006-08 LINCOLN MARK LT SUPER CREW MOUNT KIT SURE-GRIP EQUIPO DE MONTAJE OPTIONAL LIGHT JEU DE MONTAGE 27-1535 27-6000 SURE-GRIP BOARDS 27-6110 27-6115 27-6150 27-6155 27-6510 27-6550 ITEM CONTENTS -...
- Página 2 FINISH PROTECTION Westin products have a high quality finish that must be cared for like any other exposed finish on the vehicle. Protect the finish with a non-abrasive automotive wax, (e.g. Pure Carnauba) on a regular basis. The use of any soap, polish or wax that contains an abrasive is detrimental, as the compounds scratch the finish and open it to corrosion.
- Página 3 PROTECTION DE LA FINISSION Les produits Westin ont une finission de haute qualité qui requiert des soins, comme toute autre finission du véhicule exposée aux éléments. Protégez la finission à l’aide d’une cire non-abrasive (par exemple, Pure Carnauba) de façon régulière. L ’usage de tout savon, pâte à polir ou cire contenant un abrasif est nuisible, puisque les...
- Página 4 AVANT AVANT ROJO ROUGE FIGURE 11 FIGURA 11 Thank You for choosing Westin products Westin Automotive Products, Inc. For additional installation assistance please call 5200 N. Irwindale Ave. Suite 220 Irwindale, Ca. 91706 Customer service (800) 793-7846 or (507) 375-3559...