QSC CXD Guia De Inicio Rapido página 9

Modify Presets
To modify a preset, recall the preset with the desired output configuration, modify the Input parameters, Output parameters, then save the preset. In
addition, you can save the preset as you are going thru the creation process.
Recall a Preset
A Preset includes the output configuration, input parameters, and loudspeaker profiles (DSP, load, and assignments). There are 20 factory presets that
can be recalled, but not overwritten, and 50 user-defined presets that can be recalled and overwritten.
• Factory presets F1: Config thru F9: Config contain output configurations only.
• Factory presets F10: thru F20: contain the output configurations and basic DSP for the configurations.
• There are 50 user presets that can be recalled and overwritten.
Recalling a Preset changes the configuration of the amplifier. You can recall factory or user-defined presets.
HOME > PRESETS > PRESET RECALL (ENTER)
STEP 1 — Select Preset
F1: A B C D
F1: A B C D
M A M
Input Sub
STEP 2 — Confirm Selection
F1: A B C D
F18: 3-Way
M
A+B
Press ENTER to confirm selection
Save a Preset
After modifying the Inputs and Outputs for all channels, save the current settings as one of the 50 user-defined presets (U1: thru U50:). Each of the
user presets, by default, is the same as factory preset F1: A B C D, so when you save the preset you are "overwriting" the preset currently in that
numbered position. If you started by recalling a factory preset, you must use the SAVE AS feature. If you started with a user-defined preset, you can
overwrite the preset you started with using the SAVE feature, or use the SAVE AS feature to overwrite a different user preset.
SAVE AS
HOME > PRESETS > PRESET SAVE > PRESET SAVE AS > (ENTER)
STEP 1 — Save a New Preset – Select and Edit Preset Number
U1: A B C D
User Preset Number:
New Preset Name
C o n
Edit preset number or press EXIT
B M C M D
LF MF HF Full
M M
C D
21
f i g - A
SAVE
Indicates more Presets
To select the Preset configuration, press
To confirm the selection, press
The message at the bottom changes to: "Recalling Preset now..."
You may hear relays clicking!
Current active
preset.
Turn to select desired number (1 thru 50)
9
Scroll to desired Preset
20 Factory, 50 User-defined
To edit User Preset Number, press
To confirm, press
TD-000350-00-E
EN
ENTER
ENTER
ENTER
ENTER