Final Assembly - Emerson Designer CF755GRT06 Manual Del Usuario

6.1
Screw the Two Threaded Studs (supplied) into the
Tapped Holes in the Hanger Bracket (Figure 24).
6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Holes in the
Ceiling Cover (Figure 25).
6.3
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the Two Knurled Knobs (supplied). (Figure 25).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the Ceiling and the Hole in the
Ceiling Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.

6. Final Assembly

Figure 24
Figure 25
16
THREADED
STUDS (2)
CEILING
COVER
THREADED
STUDS (2)
LOCKWASHERS (2)
KNURLED KNOBS (2)
U.L. Model No.: CF755