Final Assembly - Emerson RIPTIDE CF605BQ00 Manual Del Usuario

6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the
Ceiling Cover (Figure 33).
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied). (Figure 33).
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod.
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
#8-32 x 30
THREADED
STUDS (2)
LOCKWASHERS (2)
Figure 33
22
CEILING
COVER
KNURLED KNOB (2)
U.L. Model No.: CF605