Assembly; Operation - Kärcher VC 4i Cordless Plus Manual De Instrucciones

Charger
WARNING
●
Only charge the appliance using the orig-
inal charger enclosed or with a charger
approved by KÄRCHER.
Use the following adapter:
 Appliance type:1.198-253.0
 Appliance type:1.198-260.0
(1)Charger
(2)Plug adapter (using the plug adapter ac-
cording to the actual situation)
20
6.195-090.0
Charger
6.195-095.0
Charger
1
2
1. Insert the extension wand into the vacu-
um cleaner.
Illustration B
For removal, press the unlock button,
and unplug the extension wand.
2. Insert the extension wand into the floor
nozzle.
Illustration B
For removal, press the unlock button,
and unplug the floor nozzle.
Note
The appliance will be shut down automati-
cally if it is in danger of overheating. Ensure
that the brush roller is not blocked in any
way.
Note
 The appliance does not work during the
charging process.
 The charging time is approx. 3 - 4 hours.
 The appliance will need be fully charged
before first use.
1. Insert the connector of the charger into
the charging interface.
Illustration C
2. Connect the power cable of the charger
to the power supply.
The charging process starts automati-
cally.
3. When the charging process is complete,
unplug the power cable of the charger
from the power supply.
English

Assembly

Operation

Charging