Using Accessories - Kärcher VC 4i Cordless Plus Manual De Instrucciones

Operation
 Press the ON/OFF button to start vacu-
uming up the dust / dirt.
Illustration D
By default, the appliance runs in full
speed mode.
 You can adjust the suction power while
vacuuming via the Energy Saving Mode
button.
Illustration E
3-stage suction is available with full
speed, medium speed and energy sav-
ing modes.
The table below describes the details of
suction power stages:
Suction Full speed
power mode indi-
stage cator status
Energy Off
saving
mode
Medium Off
speed
mode
Full speed On
mode
 Press the floor nozzle button to switch
the floor nozzle on or off.
Illustration F
Indicators
Illustration G
Charging / battery indicator
1
Floor nozzle indicator
2
Full speed mode indicator
3
The table below describes the meanings of
LED indicators on the appliance:
Description
Long-lasting fea-
ture designed for
the long-running
job
To clean up soft
or hard floor at
optimized and
moderate speed
To capture heavy
and deep-down
dirt
English
Indicators Status /
Color
Charging / Flashing
battery in- (green)
dicator
Always on
(green)
Always on
(red)
Floor noz- On
zle indica-
tor
Off
Full speed On
mode indi-
cator
Off

Using accessories

Floor vacuum cleaner
 Attach the floor nozzle.
For cleaning carpets, floor, etc.
 Attach the upholster brush.
For cleaning upholstered furniture, mat-
tresses, laced curtains, etc.
 Attach the crevice nozzle.
Illustration H
For cleaning joints, grooves between
1
doors and windows, tiny slits, etc.
For cleaning delicate objects with care,
2
e.g. bookcases, handicrafts, etc.
Hand-held vacuum cleaner
Illustration I
 Attach the pet brush.
For cleaning dead skin cells, loose hair
of the pet.
You can use the flexible hose to extend
the length.
Illustration J
 Attach the car nozzle.
For cleaning dirt / dust in the car, etc.
You can use the flexible hose to extend
the length.
Illustration J
Description
Charging
Battery power is
more than 10 %.
Battery power is
less than 10 %.
The brush roller of
the floor nozzle is
running.
The brush roller of
the floor nozzle is
stopped.
The appliance is
running in full speed
mode.
The appliance is
running in energy
saving/medium
speed mode.
21