Astralpool VICTORIA PLUS SILENT VS Manual De Instrucciones página 10

Ocultar thumbs Ver también para VICTORIA PLUS SILENT VS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. MAINTENANCE
- Clean the pre-filter basket regularly to avoid drops in pressure. To prevent the basket from breaking, do not
hit it during the cleaning process.
- Should the pump stop, check that consumption of the running motor in amperes is equal to or below that
indicated on the manufacturer's characteristics plate. If this information is available, contact the nearest
Technical Assistance Service.
- Empty the pump if it is to remain at a standstill for a certain length of time, especially in cold countries
where there is a risk of freezing.
- Remove the purge cap (10) to empty the pump.
- Every time the pre-filter is opened, clean the seal and its seating of any impurities to ensure airtightness
when the cap is closed (Fig. 5).
- Pump components that, due to their normal use, suffer wear and/or tear must be regularly replaced to
ensure good pump performance. The following table shows the perishables and/or consumables used in the
pump and their estimated working life.
COMPONENT DESCRIPTION
O rings and general seals
Mechanical seal
Bearings
The estimated working life of the parts above has been established according to normal product use and installation
conditions.
Follow the instructions in the installation manual to maintain the working life of the pump.
6. REMOVAL
- The motor unit can be removed from the pump body without having to disconnect the pump's suction and
return pipes.
- To remove the Motor unit from the pump body, remove the screws joining them together.
10
ESTIMATED WORKING LIFE
1 year
1 year
1 year
Victoria Plus Silent VS
- ASTRALPOOL

Publicidad

Tabla de contenido
loading

Tabla de contenido