Hazard Levels; Electric Components - Kärcher FC 3d Cordless Manual De Instrucciones

ATTENTION
Please adhere to the following procedure
for filling the fresh water tank during clean-
ing work:
1.
First empty the waste water tank.
2.
Then fill the fresh water tank.

Hazard levels

DANGER
Pointer to immediate danger,
which leads to severe injuries or
death.
WARNING
Pointer to a possibly dangerous
situation, which can lead to se-
vere injuries or death.
CAUTION
Pointer to a possibly dangerous
situation, which can lead to mi-
nor injuries.
ATTENTION
Pointer to a possibly dangerous
situation, which can lead to
property damage.

Electric components

DANGER
 Do not immerse the device
into water.
 Check the faultless condition
of the appliance and the ac-
cessories before using it.
Otherwise, the appliance
must not be used.
 Immediately replace the
charger with the charging ca-
ble in case of visible damage.
24
 Turn off the appliance and re-
move the mains plug prior to
any care and maintenance
work.
 Repair works may only be
performed by the authorized
customer service.
 The appliance contains elec-
trical components - do not
clean under running water.
 Do not insert conductive ob-
jects (such as screwdrivers or
the like) into the charging
socket.
 Do not touch contacts or
wires.
 The voltage indicated on the
type plate must correspond to
the supply voltage.
 Do not scrape the power cord
across sharp edges and en-
sure that it does not get
pressed.
WARNING
 The appliance may only be
connected to an electric sup-
ply that has been installed by
an electrician in accordance
with IEC 60364.
 The appliance may only be
connected to alternating cur-
rent. The voltage must corre-
spond with the type plate of
the appliance.
 For safety reasons, we rec-
ommend that you operate the
appliance only via a earth-
leakage circuit breaker (max.
30 mA).
– 7
EN