When SIM changed or Immediately.
Change codes - Change your Security
code, PIN1 code or PIN2 code.
Using flight mode
Use this function to switch the flight
mode On or Off. You will not be able
to make calls, connect to the internet,
send messages when Flight mode is
switched On.
Using power save
Choose to switch the power saving
settings: Always on, Night only or Off.
Resetting your phone
Use Reset in phone settings to reset all
the settings to the factory definitions.
You need the security code to activate
this function.
Viewing memory status
Your GT370 has three memories
available: the phone, the SIM card and
an external memory card (you may
need to purchase the memory card
separately).
You can use the memory manager to
determine how each memory is used
and see how much space is available.
Press Menu and select Settings.
Choose Memory status and you will
then see the current status of the
memories Common, Reserved, SIM
card and External memory in your
GT370.
TIP!
See Installing a memory card for
more information.
Changing your Bluetooth
settings
Press Menu, Settings, Connectivity,
1
then choose Bluetooth.
Choose Bluetooth settings. Make
2
your changes to:
My visibility - Choose whether to
Show or Hide your device to others.
My name - Enter a name for your
GT370.
My address - View your Bluetooth
address.
Changing your connectivity
settings
Your connectivity settings have already
been set up by your network operator,
so you can enjoy your new phone
from the off. If you want to change any
01
02
03
04
05
06
07
08
53