Publicidad
Chain Installation
Montage der Kette
A
Instalación de la cadena
B
1
3
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
NOTICE
Use of a chain tool other than the
recommended can damage the chain.
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
NOTICE
Use of a chain tool other than the
recommended can damage the chain.
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
NOTICE
Use of a chain tool other than the
recommended can damage the chain.
Install
Installer
Einbauen
Installare
Instalar
Monteren
Installation de la chaîne
C
Installazione della catena
D
De ketting installeren
E
2
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
Use of a chain tool other than the
recommended can damage the chain.
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
Use of a chain tool other than the
recommended can damage the chain.
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
Use of a chain tool other than the
recommended can damage the chain.
Instalar
Measure
取り付け
安装
Messen
Medir
Instalação da Corrente
F
チェーンの取り付け
G
安装链条
H
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
NOTICE
Use of a chain tool other than the
recommended can damage the chain.
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
NOTICE
Use of a chain tool other than the
recommended can damage the chain.
Wrap the chain around the large chainring
and largest cassette cog with the flat edge
facing away from the chainring and cassette.
2x systems: Add one inner link and one
outer link where the chain starts to overlap.
1x systems: Add two inner links and two
outer links where the chain starts to overlap.
Use a Park Tool CT-3.2 (or Pedro's chain
tool) chain breaker tool to break the chain at
the inner link.
NOTICE
Use of a chain tool other than the
recommended can damage the chain.
Mesurer
Medir
計測
Misurare
测量
Meten
2x
1x
NOTICE
NOTICE
NOTICE
Remove/Loosen Retirer/Desserrer
Retirar/Desapertar
取り外し / 緩める
Entfernen/Lösen Rimuovere/Allentare
Verwijderen/Losmaken 拆卸 / 旋松
Quitar/Afl ojar
64
Publicidad
