Sensor Control - Hamilton Beach 14010 Manual De Instrucciones

Sensor Control

This iron is equipped with a position/motion sensor. This
means that if the iron is left motionless it will turn off
automatically and cool to room temperature.
To restart iron, simply move the iron and allow it to reheat
on heel position.
The iron will reheat to the previously selected setting.
Position Sensing
The iron will turn off automatically when left in the following
positions.
The auto off time varies based on the iron's position.
Resting on soleplate
Resting on either
side
Resting on heel
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position,
the iron will automatically shut off and the red light will blink.
Move iron upright to vertical position to turn back on.
840182704 ENv01.indd 5 840182704 ENv01.indd 5
(available on some models)
Iron Position
5
Motionless Time
30 seconds
30 seconds or
15 minutes
depending on
exact orientation
15 minutes
12/20/13 3:08 PM 12/20/13 3:08 PM