Sauder 412920 Manual De Instrucciones página 12

Step 7
First, fi ll the four holes in the edge of the LEFT REAR LEG (X)
å
1/4 to 1/2 full with GLUE (KK). Then, insert the WOOD DOWELS
in the ENDS (B and C) and BRACE (I) into the holes of the LEG.
Wipe away the excess GLUE.
NOTE: Be sure the CAM SCREWS insert into the holes in the
å
short edges of the LOWER LEFT END (C) and BRACE (I).
Fasten the LEFT REAR LEG (X) to the LOWER LEFT END (C)
å
and BRACE (I). Tighten two HIDDEN CAMS.
Repeat this step for the LEFT FRONT LEG (V) making sure all
å
HIDDEN CAMS are tight.
Page 12
I
B
V
KK
Angled edge
412920
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
Fill the holes 1/4 to 1/2 full with GLUE.
X
C
www.sauder.com/services
Angled edge