Black 2-1/4" Flat Head Screw - Sauder 412920 Manual De Instrucciones

Step 5
Carefully turn the RIGHT END (A) over.
å
Turn two BLACK 9/16" FLAT HEAD SCREWS (CCC) into
å
the END (A) until the shoulders of the SCREWS rest on
the surface of the END.
Slide the END MOLDING (M75) onto the END (A). Line
å
up the groove in the MOLDING over the heads of the
SCREWS in the END and slide it until it is against the
RIGHT FRONT LEG (U).
Fasten the RIGHT REAR LEG (W) to the RIGHT END (A).
å
Use three BLACK 2-1/4" FLAT HEAD SCREWS (XX).
BLACK 9/16" FLAT HEAD SCREW
(2 used in this step)
Shoulder
Page 10
U
A
CCC
M75
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
M75
Angled edge

BLACK 2-1/4" FLAT HEAD SCREW

412920
W
XX
(3 used in this step)
www.sauder.com/services