Sauder 412920 Manual De Instrucciones página 25

Step 20
1
J
D36
Pull the DRAWER FRONT BRACKETS (NN) apart and slide them
å
into the grooves in the SMALL DRAWER SIDES (D36 and D37).
You may need to gently tap them in with a hammer.
NOTE: The DRAWER FRONT BRACKETS are marked "RH" and
å
"LH" for easy identifi cation.
Fasten the UPPER DRAWER FRONT (J) to the DRAWER FRONT
å
BRACKETS (NN). Use four BROWN 9/16" LARGE HEAD SCREWS (DDD).
3
Fasten the SMALL DRAWER BACK (D77) to the SMALL DRAWER SIDES (D36 and D37). Use four BLACK 1-9/16" FLAT
å
HEAD SCREWS (30S).
NOTE: Be sure the SMALL DRAWER BOTTOM (D716) inserts into the groove in the SMALL DRAWER BACK (D77).
å
www.sauder.com/services
Push down
NN
D37
BROWN 9/16" LARGE HEAD SCREW
(4 used in this step)
D77
D36
D716
D37
2
DDD
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the SMALL DRAWER BOTTOM (D716) into
å
the grooves in the SMALL DRAWER SIDES (D36
and D37) and UPPER DRAWER FRONT (J).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
412920
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
U n
fi n
s u
i s h
r f a
e d
c e
D716
D36
D37
J
30S
(4 used in this step)
Page 25