EN
20
CLEANING AND CARE
Note: Do not use chemicals when cleaning.
• Turn off the power and unplug the appliance.
• If there is dust on the outer surface, wipe with a soft cloth. If the surface is very dirty,
use water (below 50°C) and a neutral detergent. Then wipe the outside with a soft
cloth.
• Never use petrol, thinners or other substances that could damage the surface.
Cleaning the nebuliser grille
If too many foreign bodies adhere to the filter, this will affect the wind resistance, so
clean it at least once a month.
• Turn off the unit and unplug it from the wall outlet.
• Open the rear cover and remove the nebuliser grille.
• Soak the nebuliser grille in soapy water for a few minutes, rinse under running
water and then dry.