Identification; Marking; Safety; Designated Use En - Abicor Binzel CR1000 Instructivo De Servicio

CR1000/CR1250

1 Identification

The CR1000/CR1250 cooling unit is used by industry and the trade sector exclusively for the cooling of liquid-cooled
welding torches.
It must only be used with original ABICOR BINZEL spare parts. These operating instructions only describe the
CR1000/CR1250 cooling unit.

1.1 Marking

This product fulfils the requirements that apply to the market to which it has been introduced. A corresponding marking has
been affixed to the product, if required.

2 Safety

The attached safety instructions must be observed.
2.1 Designated use
• The device described in these instructions may be used only for the purpose and in the manner described in these
instructions. In doing so, observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.
2.2 Responsibilities of the user
• Only the following personnel may work on the device:
• those who are familiar with the basic regulations on occupational safety and accident prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• those who have read and understood the chapter entitled "Safety Instructions";
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training, knowledge, and experience.
• Keep other people out of the work area.
• Please observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention.
2.3 Personal protective equipment (PPE)
To prevent danger to the user, these instructions recommend the use of personal protective equipment (PPE).
• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves and safety shoes.
BAL.0351.0 • 2020-06-10
1 Identification
EN - 3