Best WC23I Manual Del Usuario página 12

PREPARE THE HOOD
NON - DUCTED HOODS ONLY
Note: The following materials must be purchased separately for non-ducted
recirculation installations.
• Non - Ducted Recirculation Kit, Model
ANKWC23.
1. Remove the tape on the electrical system
plate. Mount the electrical system plate
attaching it with 3 mounting screws
(3.9x9.5mm) and 2 washers (Fig. 10).
2. Discard discharge
supplied with the hood. Install the 5" to
6" adapter (supplied with the Non-Ducted
Recirculation Kit).
3. Secure the plenum to the flue mounting
bracket with (2) 3.9x6mm flat head
screws (the screws are supplied with the
Non-Ducted
"ANKWC23"). Fig. 11.
collar/damper
Recirculation
- 12 -
3.9x6mm
FLAT HEAD
SCREWS
Kit
PLENUM
PLENUM
5" DUCT
5" to 6"
ADAPTER
BLOWER
COLLAR
ELECTRICAL
SYSTEM
PLATE
FIG.10
FLUE MOUNTING
BRACKET
FIG.11
FIG.12