Best WC23I Manual Del Usuario página 14

INSTALL THE HOOD, cont'd
8. Carefully place the decorative flue on the hood. Fig. 14.
- On ducted installation in rooms with 8-foot ceilings, the air vents are
concealed. Install the flue with the air vents down.
- On non-ducted installations in rooms with 8-foot ceilings, the air vents are
exposed. Install the flue with the air vents up.
- On ducted and non-ducted installations in rooms with 9-foot ceilings, the
vents are exposed. Install the flue with air vents up.
ROOMS WITH 10-FOOT CEILINGS
Rooms with 10-foot ceilings require flue extension model AEWC23xB or non-
ducted model AEWC23xBN, available from your local dealer.
9. Discard the upper flue supplied with the product. Replace it with the flue
extension.
10. Raise the upper flue until its holes align with holes in the flue mounting bracket
(located on ceiling). Fig. 15.
11. Secure the flue with (2) 3.9x9.5mm mounting screws. Fig. 15.
12. Secure the lower flue to the upper flue with (1) 2.9x9.5mm mounting screw. Drill
the hole (1/16" Diameter) in the upper flue. Fig. 16.
LOWER
FLUE
MOUNTING SCREWS
UPPER FLUE
VENTS EXPOSED
UPPER
FLUE
3.9x9.5mm
FIG.15
- 14 -
LOWER
FLUE
MOUNTING SCREW
UPPER FLUE
VENTS
CONCEALED
FIG. 14
2.9x9.5mm
FIG.16