Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALL MOUNTING
BRACKET
DUCTED and NON-DUCTED HOODS
1. Construct wood wall framing that is flush
with interior surface of wall studs.
Make sure:
a) the framing is centered over
installation location.
b) the height of the framing will allow the
mounting bracket to be secured to
the framing within the dimensions
shown.
2. After wall surface is finished, secure
mounting bracket to framing with (2) 4.8 x
38mm mounting screws. See chart below
for mounting bracket location.
CEILING HEIGHT
8-FOOT
9-FOOT
10- FOOT (see note b)
Notes:
a. Distance above cook top must not be less than 9-1/2".
A maximum of 15-1/2" is highly recommended for best capture of cooking
impurities.
Distances over 15-1/2" above the cook top are at the installers discretion-
providing that ceiling height and flue length permit.
b. Requires optional 10-foot flue extension, ducted model AEWC23SB or
AEWC23CB or non-ducted model AEWC23SBN or AEWC23CBN.
HOOD DISTANCE ABOVE 36" HIGH COOK TOP (see note a)
9-1/2"
10-1/2"
11-1/2"
MOUNTING BRACKET LOCATION ABOVE 36" HIGH COOK TOP
38"
39"
40"
39"
40"
38"
- 9 -
FRAMING BEHIND CROSS
SUPPORT
WOOD CROSS
SUPPORT BEHIND
DRYWALL
12-1/2"
13-1/2"
14-1/2"
41"
41"
42"
43"
41"
42"
43"
DRYWALL
15-1/2"
44"
44"
Publicidad
Tabla de contenido
