Daily Check; Maintenance Table - Husqvarna TF545D Manual De Usuario

Moving
5• 1
Stop the engine.

Daily check

Before starting the engine, check the
following points.
 There must be no loosened or
broken nuts or bolts.
n Cleanliness of the
air filter element
4• 6
Do not use inflammable
solvent to clean the foam
air filter element.
n Check lub. oil
2• 1 2• 2 2• 4
 No leaks of petrol or lub.
n Sufficient diesel
2• 3
 Keep the machine clean.
 Environment protection.
 No abnormal vibrations
excessive noise.
MOVING AND HANDLING
Change the transport wheel for the
blades.

MAINTENANCE TABLE

After the first 20 hours of every month
 Change the lub. Oil of engine and gearbox.
 Clean the oil filter. (Fig. 4.6)
Every 150 hours of every 3 months
 Clean the air filter * (2 Fig. 4.5).
 Change the lub. oil of engine and gearbox.
 Clean the oil filter. (Fig. 4.6).
 Clean the fuel filter.
Every 500 hours or every 6 months
 Clean the oil filter. (Fig 4.6).
 Clean the fuel filter.
level
 Clean the element of air filter. (Fig 4.5).
 Clean the oil filter. (Fig. 4.6.)
 Clean the fuel filter.
 Change the element of air filter. * (Fig. 4.5).
 Change the gears and bearings * *.
or
* Clean more often in condition of use where the air is dusty or laden with aerial debris.
* * Not essential except in the event of performance problems (to be conducted by a Husqvarna workshop).
Every 1000 hours or once a year
Lift the drag bar from the ground using
the handlebar and then advance
forwards.