Installation - Hach FL1500 Manual Básico Del Usuario

Figure 2 Product components
1 FL1500 flow logger
2 Communications cable, USB A to B

Installation

Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
Installation guidelines
• Do not install the instrument in a location that receives direct exposure to sunlight, ultraviolet
radiation (UV), severe weather or next to a heat source.
• Make sure that there is sufficient clearance around the instrument to make connections.
• Install the instrument in an environmental enclosure or protective cover when installed outdoors.
Mechanical installation
Mounting
This instrument is rated for an altitude of 2000 m (6562 ft) maximum. Although the use of this
equipment above the 2000 m altitude does not show any substantial safety concern, the
manufacturer recommends that users with concerns contact technical support.
Attach the instrument to a wall, a rail or a pipe
Refer to Figure 3 and
the equipment.
8 English
Figure 4. Make sure that the wall mounting is able to hold 4 times the weight of
3 AC power cable with country-specific connector
D A N G E R
1
with a diameter of 20 to 50 mm (0.75 to 2.0 inch).