Hardware Contents; Preparation; Initial Installation - Harbor Breeze BRD48BNK6LRS Manual Del Usuario

HARDWARE CONTENTS (shown actual size)
AA
Wire
Connector
Qty. 4

PREPARATION

Before beginning assembly of product, make sure all parts are present. Place motor on carpet or on
foam to avoid damage to finish. Compare parts with package contents list and hardware contents list. If
any part is missing or damaged, do not attempt to install, operate or assemble the product.
Estimated Assembly Time: 120 minutes
Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses,
Stepladder and Wire Strippers
Helpful Tools (not included):
Cutters

INITIAL INSTALLATION

Turn off circuit breakers or fuse and wall switch to
1.
the fan supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
BB
Fiber
Blade
Washer
Qty. 18
+ 1 extra
+ 1 extra
AC Tester Light, Tape Measure, Do-It-Yourself Wiring Handbook and Wire
CC
Blade Motor Screw
Screw /Lock Washer
Qty. 18 Qty. 12
+ 1 extra
6
DD
1