Downrod-Style Fan Mounting - Harbor Breeze BRD48BNK6LRS Manual Del Usuario

INITIAL INSTALLATION
5. Remove preassembled motor blocks from
underside of motor housing (D). Discard the
motor blocks.
For DOWNROD-STYLE FAN MOUNTING,
proceed to Step 1 below.
For CLOSEMOUNT-STYLE FAN MOUNTING,
skip to page 10.

DOWNROD-STYLE FAN MOUNTING

1A. Remove pin (L) and clip (M) from downrod (A).
Partially loosen preassembled set screws and nut
1B.
in motor housing yoke at top of motor housing (D).
2. Insert downrod (A) through canopy (B) and yoke
cover (E). Thread wires from motor housing (D)
up through downrod (A).
5
Motor
Block
1A
M
Yoke
D
2
B
8
1B
A
L
Set Screw
E
Motor
Block
D
A