Closemount-Style Fan Mounting - Harbor Breeze BRD48BNK6LRS Manual Del Usuario

DOWNROD-STYLE FAN MOUNTING
6. Install hanging ball of downrod (A) into opening of
mounting bracket (C). Align slot in hanging ball
with tab in mounting bracket (C).
DANGER: Failure to align the slot in the ball
with the tab may result in serious injury or death.
Continue to WIRING on page 11.

CLOSEMOUNT-STYLE FAN MOUNTING

1. Remove preassembled canopy cover from bottom
of canopy (B). To remove canopy cover from
canopy (B), twist canopy cover until the two small
protrusions on the inner lip of the canopy cover
align with the two notches on the bottom of the
canopy (B). Pull on canopy cover to remove.
NOTE: The downrod (A), yoke cover (E) and
canopy cover are not used in this type of
installation.
Remove every other preassembled screw/
2.
lock washer from top of motor housing (D).
6
A
1
2
D
10
Tab
Slot
Canopy
Cover
Screw/
Lock Washer
C
B