Care Of Your Press & Refresh - Shark Press & Refresh GS500Q Manual Del Usario

Care of Your Press & Refresh
Cleaning & storing
1 T urn the garment steamer off
"O".
2 U nplug the appliance from the
electrical outlet.
3 L et the appliance cool
completely for approximately
30 minutes.
4 E mpty the water from the
water tank.
5 W ipe the exterior of the
garment steamer with a damp
cloth and wipe dry if needed.
GS500Q_IB_ES_101123.indd 13
6 B undle up the power cord and
secure it with the VELCRO
strap that is attached to the
power cord. Always store your
appliance in a cool, dry area.
Care & use of the small steam
bonnet frame
7 T he steam bonnet helps filter
impurities from your water.
It might become slightly
discolored over time.
8 L et the steamer cool completely
before removing the bonnet.
Gently pull on either side of
the bonnet to remove from the
steam nozzle.
™
9 H and wash the bonnet in cold
water with a mild detergent and
®
let air dry completely before
using again. Do not dry in
clothes dryer.
10 T o re-attach the bonnet, pull
one corner of the bonnet over
the steam nozzle then the other
corner. Secure the bottom of
the bonnet to the nozzle using
the bottom tab.
English
13
10-11-24 10:11 AM