What To Do If - Electrolux EHD 6671 P Instrucciones Para El Montaje Y Para El Uso

What to do if ...

Problem
The appliance cannot
be switched on or is not
operating
The residual heat indi-
cator is not displaying
anything
The automatic warm up
function is not switch-
ing itself on
Repeated acoustic sig-
nal (6x), appliance
switches off
Possible cause
More than 10 seconds
have passed since the
appliance was
switched on
The lock is switched on Switch off the lock (See
The child safety device
is switched on
Several sensor fields
were touched at the
same time
Safety cut-out has
been triggered
The cooking zone was
only on for a short time
and is therefore not hot
There is still residual
heat on the cooking
zone
The highest heat set-
ting is set
One or more sensor
fields have been cov-
ered for longer than 10
seconds
Remedy
Switch the appliance
on again.
the section "Locking/
unlocking the control
panel")
Deactivate child safety
device (See the section
"Child safety device")
Only touch one sensor
field
Remove any objects
(pan, cloths, etc.) that
are lying on the control
panel. Switch the appli-
ance on again
If the cooking zone is
supposed to be hot,
call your local Service
Force Centre.
Let the cooking zone
cool down
The highest heat set-
ting has the same pow-
er as the automatic
warm up function
Uncover sensor field
51