Electrolux EHD 6671 P Instrucciones Para El Montaje Y Para El Uso página 52

Problem
Acoustic signal sounds
when appliance is
switched off
Acoustic signal sounds
and appliance switch-
es itself on and then off
again; after 5 seconds
another acoustic signal
sounds
Display is switching be-
tween two heat settings
flashes
is lit
52
Possible cause
The control panel is
wholly or partly covered
by objects.
The On/Off sensor field
has been covered up,
e.g. by a cloth
Power management is
reducing the power of
this cooking zone
Unsuitable cookware
No cookware on the
cooking zone
The diameter of the
bottom of the cookware
is too small for the
cooking zone
Overheating protection
for the cooking zone
has been triggered
Safety cut-out has
been triggered
Remedy
Remove objects.
Do not place any ob-
jects on the control
panel
See the section
"Switching the power
function on and off"
Use suitable cookware
Place cookware on the
cooking zone
Move onto a smaller
cooking zone
Use suitable cookware
Switch off the cooking
zone. Switch the cook-
ing zone on again
Switch off the cooking
zone. Switch the cook-
ing zone on again