Sauder 409047 Manual Del Usuario página 19

Step 14
1
D24
Groove
Insert the DRAWER SIDES (D24 and D25) at
å
an angle into the slot at each end of the LEFT
DRAWER FRONT (L2).
3
Fasten the DRAWER BACK (D69) to the DRAWER SIDES (D24
å
and D25). Use four BLACK 1-9/16" FLAT HEAD SCREWS (30S).
NOTE: Be sure the DRAWER BOTTOM (D968) inserts into the
å
groove of the DRAWER BACK (D69).
Repeat this step for the other drawer.
å
www.sauder.com/services
The tabs should insert freely
into the slots. Gently tilt the
DRAWER SIDES side to side
until the tabs slip into the slots.
D25
L2
D69
D24
D968
VIEW THE T-LOCK BOX VIDEO
2
U n
fi n
s u
i s h
r f a
c e
D24
Be sure the DRAWER
BOTTOM inserts into the
DRAWER FRONT groove.
Slide the DRAWER BOTTOM (D968) into the
å
grooves in the DRAWER SIDES (D24 and D25) and
LEFT DRAWER FRONT (L2).
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(8 used in this step)
D25
409047
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
e d
D968
D25
L2
30S
Page 19