Black 7/8" Machine Screw; Gold 5/16" Flat Head Screw - Sauder 409047 Manual Del Usuario

Step 15
Insert a SLIDE CAM (10A) into each DRAWER SIDE (D24 and
å
D25).
Fasten the DRAWER RIGHT (35DC) and DRAWER LEFT (35DD)
å
to the DRAWER SIDES (D24 and D25). Use four GOLD 5/16"
FLAT HEAD SCREWS (3S).
NOTE: The screw head in the CAM must be visible through the
å
slotted hole in the SLIDE.
Fasten two KNOBS (17K) to the LEFT DRAWER FRONT (L2). Use
å
two BLACK 7/8" MACHINE SCREWS (37S).
Repeat this step for the other drawer.
å
2
3
Page 20
Roller end
1
D25
L2
17K

GOLD 5/16" FLAT HEAD SCREW

(8 used for the SLIDES)

BLACK 7/8" MACHINE SCREW

(4 used for the KNOBS)
10A
D24
(4 screws per drawer)
3S
409047
Almost time to
celebrate! With a nap.
37S
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
Roller end
1
2
3
www.sauder.com/services