Lenco DAR-061 Manual Del Usuario página 12

Storing DAB station presets
It is possible to store up to 10 of your favourite DAB stations. This will enable you to access
your favorite stations quickly & easily.
1. To store a preset, you must first be listening to the station that you would like to save,
press and hold the PRESET button for 1 second. The LCD will then show "Preset"
2. Turn the 'Prev/Next' knob on the unit or press the
choose the preset number from 1-10 you wish to use,
unit or press the OK button on remote control to
Recalling DAB station presets
1. You can recall the preset stations list by pressing the PRESET button or
the remote control.
2. Turn the 'Prev/Next' knob on the unit or press the
select the preset station,
on remote control to activate.
NOTE: If you choose a preset that hasn't been allocated a station, then "Preset Empty" will
be displayed.
DAB quick scan
Press the button on the unit or scan button on the remote control to quick scan.
DAB manual tuning
You can use this option to manually tune DAB radio stations.
Turn the 'Prev/Next' knob on the unit or press the
highlight the desired Manual tuning setup, then press the OK button on the unit or press
the OK button on remote control to select the DAB frequency. Then press the OK button on
the unit or press the OK button on remote control to confirm.
Prune station
When your radio has performed multiple scans in different regions, you may find you that
you have stored stations that you can no longer receive. This function automatically
removes any stations that you cannot listen to.
Turn the 'Prev/Next' knob on the unit or press the
highlight the desired Prune station setup, then press the OK button on the unit or press the
OK button on remote control to select the YES or NO. Then press the OK button on the unit
or press the OK button on remote control to confirm.
DRC (Dynamic Range Control)
This causes the radio to reduce the dynamic range of the audio signal. The purpose of this it
to adapt the dynamic range of the audio signal when listening in a noisy environment.
Note: This feature is not available on all DAB stations.
Turn the 'Prev/Next' knob on the unit or press the
highlight the desired DRC setup, then press the OK button on the unit or press the OK
button on remote control to select the Off/Low/High. Then press the OK button on the unit
or press the OK button on remote control to confirm.
Station list
then press the OK button on the unit or press the OK button
12
button on remote control to
then press the OK button on the
store the preset.
button on remote control to
button on remote control to
button on remote control to
button on remote control to
button on