Lenco DAR-061 Manual Del Usuario página 9

Set time and date
Should you need to set the time & date manually follow the below steps.
1. Press and hold the 'Menu' button (In Bluetooth/AUX in mode, you only need to press
the MENU button to enter the MENU settings),
2. Turn the 'Prev/Next' knob on the unit or press the
highlight the desired time setup, then press the OK knob on the unit or press the OK
button on remote control to continue.
3. Turn the 'Prev/Next' knob on the unit or press the
set the digit to the correct date/time,
OK button on remote control to confirm.
Set Alarms
Should you need to set the Alarms manually follow the below steps.
1. Press and hold the 'Menu' button (In Bluetooth/AUX in mode, you only need to press
the MENU button to enter the MENU settings),
1. Turn the 'Prev/Next' knob on the unit or press the
highlight the desired Alarm setup, then press the OK button on the unit or press the OK
button on remote control to continue.
the screen will appear as below.
button on remote control to
button on remote control to
then press the OK knob on the unit or press the
the screen will appear as below.
button on remote control to
9