Sauder Via 419600 Manual Del Usuario página 9

Step 5
Insert the HALF GROMMETS (63P) and HALF GROMMET CAPS (64P) into the notches in the top edges of the ENDS (A4 and BB).
å
Insert two METAL PINS (1R) into the holes in the top edges of the ENDS (A4 and BB).
å
STOP: If you purchased the 419603 Hutch, follow the instructions from the 419603 book to attach the TOP (C2) and Hutch.
å
If you are not attaching the 419603 Hutch, continue with the following steps.
å
Fasten the TOP (C2) to the ENDS (A4 and BB) and BACK (D). Tighten eight TWIST-LOCK® FASTENERS.
å
NOTE: Be sure the METAL PINS insert into the holes in the TOP.
å
1R
www.sauder.com/services
64P
63P
BB
1R
This hole must be here.
C2
D
419600
STOP
If you purchased the
419603 Hutch, follow
the instructions from the
419603 book to attach
the TOP and Hutch.
63P
64P
A4
Page 9