Assembly Steps - Sauder Via 419600 Manual Del Usuario

Step 1
Assemble your unit on a carpeted fl oor or on the
å
empty carton to avoid scratching your unit or the fl oor.
To begin assembly, push a SAUDER TWIST-LOCK®
å
FASTENER (7F) into the large holes in the ENDS (A4
and BB) and BACK (D).
Do not tighten the TWIST-LOCK® FASTENERS in this step.
(16 used)
7F
www.sauder.com/services
7F
D
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
A4
419600
STOP
If you purchased
the 419603
Hutch, assemble
that unit fi rst.
7F
BB
Page 5