Sauder 423450 Manual Del Usaurio página 26

Step 23
1
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D270
Groove
å
Fasten two DRAWER SIDES (D270) to one of the
DRAWER BOX FRONTS (D528). Use four BLACK
1-9/16" FLAT HEAD SCREWS (30S).
3
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
D270
D530
Be sure the DRAWER
BOTTOM inserts into
the DRAWER BOX
FRONT groove.
å
Fasten a DRAWER BOX FRONT (D530) to the
DRAWER SIDES (D270). Use four BLACK 1-9/16"
FLAT HEAD SCREWS (30S).
Page 26
30S
(8 used in this section)
D528
D270
30S
(8 used in this section)
D270
VIEW THE T-LOCK BOX VIDEO
2
D270
With the palm of your hand,
tap the DRAWER BOTTOM
into the grooves.
å
Slide a DRAWER BOTTOM (B49) into the grooves in the
DRAWER SIDES (D270) and DRAWER BOX FRONT (D528).
4
Start each screw a few turns before
completely tightening any of them.
BLACK 1-9/16" FLAT HEAD SCREW
(4 used in this section)
W
D530
å
Fasten a DRAWER BRACE (W) to the DRAWER BOX
FRONTS (D528 and D530). Use two BLACK 1-9/16"
FLAT HEAD SCREWS (30S).
å
Repeat this step for the other drawer.
423450
Be sure the DRAWER
BOTTOM inserts
into the DRAWER
BOX FRONT groove.
D528
B49
D270
30S
D528
Hidden part using
recycled material.
Color may vary.
www.sauder.com/service