6. FUCNTIONS AND CLEANING
It is advisable to turn the machine off at the mains before starting any cleaning processes.
Do not wash the machine using water jets and/or water at high pressure.
We recommend at least one daily clean of the components in the juice squeezing zone (cups,
squeezing balls, drip tray, filter, blade and cover), following the cleaning instructions.
The product provided by the machine is citrus juice with a pH level of 4.5, which is not considered
as being a potentially dangerous foodstuff.
6.1. INITIAL START UP
Select the correct set of Cups, Balls and Fruit Selector according to the size of the fruit to be
squeezed. See ACCESSORIES section in this manual.
Fit all the parts in their correct positions. See assembly in the section on CLEANING
Z14 Manual Mode:
-
Once the machine is switched on, the display will show either a number between 1 and 50 or
the letter C. The number indicates the quantity of fruits to be squeezed, while the letter C sets
the machine to squeeze continuously for approximately 30 minutes.
-
To st the number of oranges to squeeze, press the SELECT button repeatedly to increase the
number (from 1 to 50, followed by the letter C; 1,2,3, ..........48,49,50, C,1,2,3....). Alternatively,
press and hold the SELECT button for 2 seconds and the number will decrease.
-
Continue until you visualize the wanted number.
-
The selected number will be stored on the display after the first complete squeeze cycle is
finished. The number will be stored even if the machine is switched off. You may change the
number repeating the complete number selection process.
-
Press the ON button to start squeezing. During the process, the display will show the remaining
amount of fruits to be squeezed. If you wish to repeat the process, simply press ON. To stop
the process, press the STOP button.
Z14 Self-service Mode:
-
Once the machine is turned on, the screen displays an orange icon. This means that the
machine is ready to squeeze fruit.
-
When you press the tap down, the juicer will start working and the screen will display a Clock
icon and the word "Run", while the machine is working. In order to stop the machine, just
release the tap.
29