Float Assembly; Drain Plug Assembly; Swivel - Polaris LCS Instrucciones Para La Instalación

3. Place the basket on a flat surface and turn
the handle clockwise. Remove the handle
assembly and set it aside.
Basket
Drain Plug
4. Remove the lid by pressing both tabs inward
and lifting it from the basket.
5. Empty all debris from the basket. Replace
the lid by aligning the tabs with the
corresponding slots. Push down to lock
the lid into place.
Under heavy debris loads, we recommend
checking and cleaning the basket frequently.
6. Place the handle assembly onto the lid and
twist counterclockwise until locked. Ensure
the handle assembly is resting level on the
lid, with the guide pins inside the
handle assembly.
Lid
Tab
Handle
Float
Assembly
Housing

Swivel

Slot
Basket
7. Align the arrowhead on the basket with
the arrowhead on the float assembly and
lower the basket into the housing. Turn
counterclockwise while pressing downward
slightly until the basket drops securely into
place. If the handle stops turning, but the
basket is not completely inserted, remove
the basket, realign the arrows and reinsert.
Handle
Assembly
Guide Pin
8. When the basket is in the correct position, it
can be easily secured by turning the handle
clockwise until it locks into place.
Handle
Align
Arrows
Heads
Basket Drops
Into Place Here
2
Regulator
Handle Assembly
Sleeve
Locked Into Place On Lid
Lid
Basket
Basket
Float
Assembly