Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 1: ASSEMBLE THE LEGS
Arrange the (4) leg sections as shown in STEP 1.
Use the (2) leg connectors and (8) leg connector
bolts and hexnuts to assemble the legs. The upper
leg connector with spacer has to be assembled on
top. Adjust legs so they are approximately 90°
from one another. See STEP 1A. Tighten all bolts
securely!
STEP 2: INSTALL THE RING SECTIONS TO
THE FIREBOWL
Place (1) ring section to the underside of the
firebowl and use (4) bolts and nuts to assemble,
only finger tighten the bolts. Install the remaining
(3) ring sections, making sure the ring sections fit
together to form a continuous ring. When all ring
sections are installed, tighten all bolts securely.
STEP 3: ASSEMBLE FIREBOWL ASSEMBLY
TO LEG ASSEMBLY
Carefully place the firebowl onto the center of the
legs. Move the firebowl as little as possible to align
the hole in the center of the firebowl with the spacer
in the leg connectors. Use (1) T bolt, washer and
locknut to fasten the firebowl to legs. See STEP 3.
Tighten the bolt securely!
CAUTION: The firebowl support pins on the legs will
scratch the underside of the bowl if moved
excessively!
STEP 4: ASSEMBLE C BRACKETS AND INSTALL
THE LARGE COOKING GRILL
First, assemble the (2) C brackets to the large cooking grill.
Match the C brackets to the threaded backplates on the
main cooking grate as shown in STEP 4. Assemble the C
brackets to the backplates with (2) eye bolts. Tighten the
eye bolts securely. Next, carefully place the large cooking
grill onto the firebowl. Using the handles, rotate the large
cooking grill until the C bracket holes match with any two
leg holes. See STEP 4A.
STEP 4A
ALIGN C BRACKET
WITH LEG HOLES
ROUND ROCK GRILL, ROTISSERIE & FIRE PIT
TM
ASSEMBLY INSTRUCTIONS
STEP 1A
LARGE
COOKING
HANDLES
GRILL
STEP 4
C BRACKET
LARGE COOKING
MODEL 590501
UPPER LEG
CONNECTOR
LEG SECTION
RING /
HANDLE
SECTION
RING
SECTION
HEXNUT
STEP 3
WASHER
EYE BOLT
BACKPLATE
GRILL
®
LEG CONNECTOR BOLT
SPACER
LOWER LEG
CONNECTOR
LEG CONNECTOR
HEXNUT
RING SECTION BOLT
T BOLT
POINTED BOWL
SUPPORT PIN
LEG ASSEMBLY
LOCKNUT
T BOLT
STEP 3A
Page 3
STEP 1
FIREBOWL
STEP 2
FIREBOWL /
RING ASSEMBLY
Publicidad
