Publicidad
Idiomas disponibles
Idiomas disponibles
Page 6
GRILL
ROTISSERIE
The food is cooked on the stainless steel rotisserie rod.
1. Adjust the aluminum blocks to the desired height rotisserie height.
2. OPTIONAL: The large cooking grill cable assemblies may be removed
if desired for a freely turning rotisserie. If the cable assemblies are left
assembled to the large cooking grill, the rotisserie will pull the large
cooking grill with it.
3. It is recommended that the meat be pierced by the stainless rotisserie rod
for the best hold. Remove the rotisserie rod from the aluminum blocks.
Using an Allen wrench, loosen set screws and remove one stainless
skewer, one cable assembly collar and end collar from the rod.
4. Pierce the meat with the rotisserie rod and push the meat to the fixed
skewer. The skewer should pierce the meat.
5. Reinstall and position the stainless skewer so it pierces the other side of
the meat and gives additional hold. Tighten set screw.
6. Reinstall and position the cable assembly collar to the rod. Connect the
clip hook to the large cooking grill if desired. Tighten set screw.
7. Reinstall and position the end collar. Tighten set screw.
8. Add wood or charcoal to the firebowl for desired type of fire. Do not use
wood more than 18" in length. Don't allow the wood to overhang the
sides of the firebowl. Don't overload the firebowl.
9. Light wood or charcoal and wait for desired temperature.
10. Cook food to desired preference.
ROTISSERIE
AND
GRILL
ROUND ROCK GRILL, ROTISSERIE & FIRE PIT
TM
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
The Round Rock can be used as a:
ROTISSERIE
-OR-
Please read all steps before using.
MODEL 590501
GRILL & ROTISSERIE
-OR-
GRILL
The food is cooked on the large cooking grill or the
accessory grill.
1. For best results, make sure the large cooking grill is
attached to the adjustable cable assemblies that are
fastened to the rotisserie rod.
2. Raise the large cooking grill using the rotisserie rod
handle so there is access to the firebowl.
3. Add wood or charcoal to the firebowl for desired type of
fire. Do not use wood more than 18" in length. Don't
allow the wood to overhang the sides of the firebowl.
Don't overload the firebowl.
4. Light wood or charcoal and wait for desired temperature.
5. Adjust the large cooking grill to the desired height by
turning the rotisserie rod handle. Lock the large cooking
grill in place by placing an Allen wrench into the
aluminum block and handle sprocket.
6. Make sure vegetable oil is applied to the grills that are
to be used. Apply oil by spray or with an oiled rag.
Failure to apply oil will result in food sticking to the grill
surfaces.
7. Add food to grill(s) and cook to desired preference.
The accessory grill can be used to grill food at a
different height from the large cooking grill or it can be
use to hold food until its ready to be served. The swing
Tip
feature allows the accessory grill to be removed from
the fire without having to remove the food.
FIRE PIT
The Round Rock is used as a fire pit.
1. Remove all parts of the rotisserie assembly, including
vertical rotisserie rods, stainless steel rotisserie rod and
large cooking grill.
2. Add wood or charcoal to the firebowl for desired type of
fire. Do not use wood more than 18" in length. Don't
allow the wood to overhang the sides of the firebowl.
Don't overload the firebowl.
3. Light wood or charcoal.
GRILL
®
FIRE PIT
-OR-
FIRE PIT
Publicidad
