Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 8: ASSEMBLY OF ACCESSORY GRILL
AND POT HOOK
Place the accessory grill rod into an unused leg hole.
Make sure the rod drops into the seat on the leg bottom.
Adjust the collar for the preferred accessory grill height.
Place the pot hook into the unused leg hole. Make sure
the rod drops into the seat on the leg bottom. The
accessory grill and pot hook can be pivoted 360°.
!
VEGETABLE OIL MUST
BE APPLIED TO THE
GRILL SURFACES
PRIOR TO COOKING OR
FOOD WILL NOT BE
EASY TO REMOVE
ACCESSORY
GRILL
COLLAR
ACCESSORY
GRILL ROD
COMPLETE ASSEMBLY
WITH ALL PARTS
Prior to your first use, follow these 3 steps to cure the finish as well as rid the Round Rock of paint odor.
STEP 1: Lightly coat ALL INTERIOR surfaces of the firebowl with vegetable oil or vegetable oil spray.
STEP 2: Start your first fire with 6-8 lbs of charcoal in firebowl.
STEP 3: Maintain the fire for 1 hour. After 1 hour, allow the grill to cool completely.
Note: It is important not to scrape or rub any surface during the curing process.
ROUND ROCK GRILL, ROTISSERIE & FIRE PIT
TM
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
!
IMPORTANT! CURE PROCESS
MODEL 590501
®
POT HOOK
Page 5
Publicidad
