Publicidad
Idiomas disponibles
Idiomas disponibles
Page 4
STEP 5: ASSEMBLE VERTICAL ROTISSERIE RODS
Place the black vertical rotisserie rods into the C bracket slots
and slide the rods thru the leg until the rod hits the bottom of
the leg. Adjust the leg so it drops into the seat on the leg
bottom. When the rod finds the seat, the rod will drop 1/2" and
the rod will no longer pivot. Rotate the rotisserie rods so the
the adjustable aluminum blocks face the same way.
The adjustable aluminum blocks hold the stainless rotisserie
rod and can be adjusted to any height preference on the rod.
Loosen the two set screws to move and tighten to secure.
Make sure both aluminum blocks are the same height.
Before use, spray or wipe vegetable oil onto the rod surfaces
so the large cooking grill can move easily up and down the rod.
STEP 6: ASSEMBLE ROTISSERIE ROD HANDLE
Insert the handle bolt into the wire handle. Align the
threaded end of the handle bolt with the hole in the handle
sprocket and fasten the bolt to the sprocket with the handle
lock nut. See STEP 6.
Install the assembled rotisserie handle sprocket to the end
of the stainless steel rotisserie rod. Make sure the collar
side of the sprocket is installed out. Push the sprocket onto
the rotisserie rod until there is about 1/4" - 3/8" of rod
coming thru the collar. Tighten the set screw securely.
STEP 7: ASSEMBLE THE ROTISSERIE AND LARGE
COOKING GRILL HEIGHT ADJUSTMENT CABLES
Place the stainless steel rotisserie rod into the adjustable
blocks. Adjust the end collar so the rotisserie turns easily.
See STEP 7A.
Unwind the stainless cables and attach the clip hooks to the
eye bolts on the large cooking grill. Turn the handle slowly
to make sure the cables are the same length. If they are not,
lock the handle in place with an Allen wrench. See STEP 7B.
Loosen the set screw on the collar that has the longer cable
and turn the collar until tight. Tighten the set screw. Both
cables should be the same length.
When the large cooking grill height is adjusted, make sure
the wire wraps on the rod between the collar and the
adjustable aluminum block.
ROUND ROCK GRILL, ROTISSERIE & FIRE PIT
TM
ASSEMBLY INSTRUCTIONS
MODEL 590501
VERTICAL
ROTISSERIE
ROD
SET
SCREWS
ADJUSTABLE
ALUMINUM
BLOCK
STEP 5A
STAINLESS STEEL
ROTISSERIE ROD
COLLAR
SET SCREW
ROTISSERIE
STEP 6A
STEP 7B
ALLEN
WRENCH
LARGE
COOKING
GRILL
HEIGHT
ADJUSTMENT
CABLE
(STAINLESS)
STEP 7
®
ADJUSTABLE
ALUMINUM
ROTISSERIE
STEP 5
SPROCKET
COLLAR
HANDLE
WIRE HANDLE
HANDLE BOLT
THREADS
END
COLLAR
STEP 7A
MEAT
ADJ ALUMINUM BLOCK
SKEWER
CLIP HOOK
EYE BOLT
BLOCK
VERTICAL
ROD
LEG
ROD SEAT
AT BOTTOM
OF ALL LEGS
HANDLE
SPROCKET
LOCK NUT
STEP 6
END COLLAR
Publicidad
