Nostalgia Products CCP400 Instrucciones Y Recetas página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly of Base Support
1.
Attach Push Handle (C) from inside Storage
Compartment (B) using two #1 Bolts and two
#6 Flat Washers. Attach two #11 Nuts to bottom.
2.
Attach Cross Bar (G) to Base Support (F) and secure with
four #1 Bolts and four #6 Flat Washers.
3.
Secure Bottom Plate (D) to Base Support (F) using four #1 Bolts and four #6 Flat Washers.
4.
Attach Legs (I) to protruding ends of Base Support (F) using two #2 Bolts, two #7 Flat
Washers and two #8 Locking Washers.
7

Publicidad

Tabla de contenido
loading

Tabla de contenido