JANE Montecarlo R1 Instrucciones página 15

In some cars, the safety belt clasp might be in a very high position
and may come into contact with the edge of the booster seat, making
this position unsafe. In this case, try moving the car seat forwards or
installing it on another seat. If you have any doubts, contact JANÉ (0a).
Not all safety systems are exactly the same, so we recommend
that you try the MONTECARLO R1 in the car in which you are going
to install it.
It is very important not to use second-hand products, as JANÉ,
S.A. can only guarantee the complete safety for items used by
the initial buyer.
JANÉ, S.A. recommends that you replace your MONTECARLO R1 seat
with a new one when it has been subjected to violent twisting
following an accident.
Ensure that all the belts are in their correct positions and
correctly adjusted to the child. Make sure that no belt is coiled up.
Make the child understand that under no circumstances should
they touch the belts or fastenings.
C M Y CM MY CY CMY
0A
The MONTECARLO R1 seat has been designed to be used in the car,
so it must not be used anywhere else.
For more information on how to use and install the MONTECARLO
R1, please visit our website www.jane.es.
K
15