Amazon 90DN160 Manual Del Usuario página 14

EN
Auto power off
• In order to conserve battery life, the product automatically
shuts off after it has been idle for approximately 30 minutes.
• Switch the product off and on again to light up the display
from standby mode.
Switching the display backlight on/off
• Press and hold the HOLD/
backlight on/off.
Display hold
• To freeze the display reading, press the HOLD/
The HOLD indicator (2) lights up.
• Press the HOLD/
operation.
Changing the measurement range
By default, the measurement range is set automatically and
the Auto range indicator (1) lights up. It is possible to set the
measurement range manually.
• Press the RANGE button (C) to activate the manual mode
and to disable the automatic range setting. The Auto range
indicator (1) goes off.
• By every press on the RANGE button (C) the relevant
decimal place changes its position.
• If a reading is higher than the measurement range, OL lights
up on the display (B).
14
button (J) to switch the display
button (J) again to return to normal
button (J).