Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not exceed the maximum allowable input range of any
measurement mode.
Mode
A~, A
mA~, mA
V~, V
Frequency,
Resistance,
Capacitance, Diode
Test, Continuity,
Temperature
Surge Protection: 8 kV peak per EN 61010
•
When changing ranges always disconnect the connector
leads from the circuit under test.
•
Always discharge capacitors and remove power from the
device under test before performing diode, resistance or
continuity tests.
•
Voltage checks on electrical outlets can be difficult and
misleading because of the uncertainty of connection to the
recessed electrical contacts. Do not use this product for
checking socket outlets. Use special equipment for checking
socket outlets.
•
Comply with all applicable safety codes. Use approved
personal protective equipment when working near live
circuits − especially with regard to the possibility of arc flash
hazards.
•
Always remove the connector leads before replacing the
battery or fuses.
Maximum Input
10 A, 600 V fast acting fuse (max.
30 seconds every 15 minutes)
500 mA, 600 V fast acting fuse
600 V ~ RMS /
250 V ~ RMS /
EN
5
Publicidad
Tabla de contenido
