Amazon 90DN160 Manual Del Usuario página 24

EN
Replacing the fuses
WARNING
product from any circuit, remove the connector leads (O) from
the input jacks (F)/(G)/(H) and switch off the product before
opening the battery compartment (K). Do not operate the
product with an open battery compartment.
NOTICE
fuses and batteries to make sure that they are still good and
that they are properly inserted. The fuse slot is labeled for its
corresponding fuse.
NOTICE
– 0.5 A/600 V fast blow for the 400 mA range
– 10 A/600 V fast blow for the 10 A range
• Open the tilt stand (N).
• Loosen the screws of the battery compartment cover.
• Remove the old fuse(s) and install the new fuse(s).
• Close battery compartment (K) and tighten the screws.
Storage
• Store the product in its original packaging in a dry area.
Keep away from children and pets.
24
Risk of electric shock! Disconnect the
If the product does not work properly, check the
Always use a fuse of the proper size and value: