Cleaning And Maintenance - Amazon 90DN160 Manual Del Usuario

• The stabilized value on the display (B) is read as the actual
reading.
NOTICE
For longer period of measurements, use a thermal
tape to attach the thermocouple probe to the surface being
measured.
NOTICE
Risk of product damage! Disconnect the
thermocouple probe (Q) before changing to other electrical
measurement mode.

Cleaning and Maintenance

NOTICE
Switch the product off and all the connector leads
before cleaning.
NOTICE
During cleaning do not immerse the product in
water or other liquids. Never hold the product under running
water.
Cleaning
• To clean the product, wipe with a soft, slightly moist cloth.
• If necessary, clean the input jacks (F)/(G)/(H), and all
connectors with a soft brush.
• Never use corrosive detergents, wire brushes, abrasive
scourers, metal or sharp utensils to clean the product.
EN
23