Publicidad
Step 5
Step
You have the option to fasten the CABINET RAILS (40AW and 40AX)
å
to one of three sets of holes in the UPRIGHTS (E and F). Measure
your component that will be sitting on the SLIDING SHELF and
the distance from the CABINET RAIL screw hole to the top of the
UPRIGHT to be sure the component will fi t in your unit.
Fasten the CABINET RAILS (40AW and 40AX) to the UPRIGHTS (E
å
and F). Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
NOTE: The CABINET RAILS are marked "CABINET RIGHT" and
å
"CABINET LEFT" for easy identifi cation.
Edge with
TWIST-LOCK®
FASTENERS
Roller end
Page 10
F
GOLD 5/16" FLAT HEAD SCREW
E
Optional CABINET RAIL holes.
417698
3S
(4 used in this step)
Roller end
www.sauder.com/services
Publicidad
